Frequency synchronous fusing machine front part names and functions

　　High frequency synchronous fusing machine names and functions have positive components which

　　A lock Press the red button to open the control box door.

　　2 power light machine is powered on, this lights (green).

　　3 welding time (left) adjust left slipway high frequency welding packaging materials when working time.

　　4 cooling time (left), after adjusting welding operation is completed to make the packaging head to keep cool compress time. When the "cut-off switch 13" to "ON" position, the cooling time is the time to complete the cutting operation, the cooling time can be adjusted by changing the switch-off time.

　　5 screen flow table shows the high-cycle current size, the current high-cycle power reflects the size of the output. Through the "output power adjustment" to adjust the output power of the machine size.

　　6 welding time (Right) Right slide adjustable frequency welding packaging materials when working time.

　　7 cooling time (R) function with the "cooling time (left)."

　　8 high-cycle light lights that high cycle being output power.

　　Nine counts show the number of work left slide.

　　10 count shows the number of times the right slide work.

　　11 Power switch controls the machine's power off,

　　12 manual / automatic control of the production process manually operated or automatic, normal production, should be placed in the "Auto" position, then a left and right workbench "→" (forward) button the machine will automatically complete in accordance with the setting parameters a welding and cutting production cycles. Adjust the machine can be placed in the "manual" position, each debug various parameters.

　　13 cut-off switch this switch to "ON" position, the machine will be cutting action, to "OFF" when not carried off.

　　14 tryout switch debugging machine use. This switch to "ON", the nose will drop to "OFF", the nose will rise.Normal production, this switch to "OFF" position.

　　Heating switch 15 for heating the mold, heat. Switch in the "ON" position, the heating, heat, to "OFF" when not heated.

　　16 high-voltage switch during normal operation this switch to "ON" position, will produce high-cycle, to "OFF" position when not generate high weeks.

　　17 High Frequency stopped working when there is an emergency situation for the emergency stop. Press this button high cycle will automatically stop, the nose will automatically rise.

　　18 high frequency start for manual operation from high cycle welding operation. When the "Manual / Auto" switch to "Auto" position, this button failure.

　　19 HF output power adjustment adjust the machine the size of the output power. With this knob to adjust the appropriate high-frequency current to accommodate different packaging materials and molds. Size of the current center of the panel "screen flow table" on the screen.

　　20 shows the machine off when the tank pressure booster cylinder output pressure.

　　21 cut into the pressurized cylinder pressure display pressure values.

　　22 shows the machine working time to head pressure head of product and mold pressure.

　　23 cut into the pressure regulator for regulating the pressure cylinder pressure, the greater the pressure, the greater the pressure off available. Turn the adjustment knob can be pulled out, push the knob is locked (can not be adjusted).

　　Head pressure regulator 24 for adjusting the head pressure of the product and the mold.